A corner apartment can be found at the end of the building: that is, part of its walls are not adjacent to the neighbors, however are the outer walls of the home.
There might be one apartment in a corner flat – it occupies the entire end of the house, it’s likewise called a corner apartment. Or two – that the windows of one overlook the street, the next – the lawn. Depends on the building program, the layout of the assumptions.
There is also a”different caste” – casing with walls from the expansion joints. Such”gaps” between entrances are normally made in multi-story structures, the most important undertaking of the created unit – to break the deformation forces through the shrinkage of the building, in the event of emergencies. Pros and cons of corner flats in the joint are somewhat different from the standard ones using the street – we will pay particular attention to this subject domikday.ru in the previous section.
Because the 2-3 sides of the space is outside, in winter it is 3-5C colder, and in summertime on the opposite – warmer. Especially if the conclusion of the house is heated by the sun. Sometimes, the gap reaches 10C – but such a difference is improper, indicates a problem with the exterior of the home – most likely have to speak to the management business, requesting (or forcing) to meet their direct duties, to spot the cracks formed.
Corner apartment in a brick house with thick walls is more comfortable. Such risks are not subjected – the thickness of the wall functions as a buffer, not allowing overheating, overcooling.
When a room has just one wall united with the street, it usually has enough space warmth to prevent freezing and warmth. However, when there are two outside walls, and they’re adjacent – there is a higher probability of freezing in the corner, the formation of condensation inside, and thus – mould, fungus. Their spores not only spoil the appearance of the space, but also cause the appearance, complication of several serious ailments.
Important! The problems of corner location are compounded when the variables are associated – overly low temperature from heating batteries along with dampness is certain to result in moldy walls.